Spider
€2.999,00
The SPIDER is an amplified #Silicon – #InGaAs photodetector with programmable gain and an embedded 24-bit data acquisition system. The employed two-color detector provides a straightforward beam alignment and a broad spectral response, ranging from 320nm to 1700nm.
Key features 🔑:
– 24-bit USB photodetector
– Crazily broadband: 320-1700 nm
– Insanely sensitive: 10^9 dynamic range
– Lovely to use: plug & play software and SDK
Description
The SPIDER is an amplified #Silicon – #InGaAs photodetector with programmable gain and an embedded 24-bit data acquisition system. The employed two-color detector provides a straightforward beam alignment and a broad spectral response, ranging from 320nm to 1700nm.
Key features 🔑:
– 24-bit USB photodetector
– Crazily broadband: 320-1700 nm
– Insanely sensitive: 10^9 dynamic range
– Lovely to use: plug & play software and SDK
Modes of Operation
SPIDER has been designed to work either standalone or connected to a PC.
Standalone.
The amplified analog signals coming from the Si and InGaAs channels can be directly read with two BNC connectors.
The gain for both channels can be easily selected by pressing the proper button on the back of the device, and reading the corresponding settings on the built-in OLED display.
Connected to a PC.
When SPIDER is connected to a computer via USB, it can be fully controlled by a customizable user interface based on a user-friendly DLL.
Thanks to the embedded 24bit data acquisition system, the Si and InGaAs analog outputs are simultaneously digitalized up to 120 kSPS – 24bit and sent to the computer to be visualized in real time.
SPIDER also includes 3 GPIO pins (general purpose input output) which can be used to generate or read digital signals. This allows the SPIDER to control simple external device (e.g. shutter open/closed) and read a start/stop acquisition signal (e.g. external trigger).
Specification
Much more than a photodetector!
SPIDER (Single-PIxel DEtectoR) is an amplified Si-InGaAs photodetector with programmable gain and an embedded 24bit data acquisition system. The employed two-color detector provides a straightforward beam alignment and a wide spectral response, ranging from 320nm to 1700nm.
The Si and InGaAs photodiodes are amplified simultaneously with two independent low-noise amplifiers, with 8 programmable gains and up to 56kHz bandwidth.
320 – 1700 nm
Spectral Range
1.5kΩ to 4.4MΩ
8 Programmable Gains
up to 56 kHz
Bandwidth
24 bit, up to 120 kSPS/ch
Embedded 2 channels ADC
2 BNCs
Independent Analog Outputs
3 GPIOs
Digital input-output pins
Documentation
Download / View Documentation
Loading...
Reload document
Open in new tab 
